Loading... Please wait...
1.877.593.1510

Currency Displayed in

Currency Converter

Categories

Currency Converter

HA-PW2016-16P 16 Port 10/100Base-TX with 16 Port PoE Switch

Hover over image to zoom

  • HA-PW2016-16P
  • Angled View
  • Accessories
Non Brand
RRP: $299.95
$261.95 (You save $38.00)
Model:
HA-PW2016-16P
Condition:
New
Availability:
In Stock

 Product Description

The HA PW2016-16P is an Unmanaged Switch that provides high-quality network connections. It also provides the PoE function for powering of wireless LAN (WAN) access points, IP security cameras, VoIP telephone, and other low port density installations. The HA PW2016-16P is a case-shaped device with a chassis of 1U high. It provides 16 10/100Base-TX ports and 8/16 PoE Injectors.

Power-over-Ethernet (PoE) eliminates the need to run DC power to other devices on a wired LAN. Using a Power-over-Ethernet system, installers need to run only a single Category 5 Ethernet Cable that carries both power and data to each device. This allows greater flexibility in locating network devices, and in many cases significantly decreases installation costs.

There are two system components in PoE: the PSE (Power Sourcing Equipment) and the PD (Powered Device) The IEEE 802.3af/at specification defines PSE as a device that inserts power onto an Ethernet cable. The PSE may be located at the switch (Endspan configuration) or it may be a separate device located between the switch and the PD (Midspan configuration). The PD is the natural termination of this link and could be an IP phone, a WLAN access point, or any other IP device that requires power. The current is transmitted over two of the four twisted pairs of wires in a Category-5 cable.

Power-over-Ethernet follows the IEEE 802.3at/at specification and is completely compatible with existing Ethernet switches and networked devices. Because the Power Sourcing Equipment (PSE) tests whether a networked device is PoE-capable, power is never transmitted unless a Powered Device is at the other end of the cable. It also continues to monitor the channel if the Powered Device does not draw a minimum current. The PSE shuts down the power to that port. Optionally, the standard permits Powered Devices to signal to the PSEs exactly how much power they need.

The PoE switch is a multi-port fast ethernet switch that can be used to build high·performance switch workgroup networks. This switch is a store and forward device that offers low latency for high-speed networking. It also features a 'store-and-forward" switching scheme that allows the switch to auto learn and store source addresses in a BK-entry MAC address table.

 Specifications  

HA PW2016-16P

Standard

IEEE 802.3 10Base-T Ethernet

Compliance

IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3x Flow Control
IEEE 802.3af/at Power over Ethernet

Transfer Rate

14,880 pps for 10Mbps
148,800 pps for 100Mbps

Connector

10/100TX: 16 × RJ-45 with auto MDI/MDI-X funtions;
Port 1~16 support PoE injector function

PoE pin assignment

V+ (RJ45 Pin 4, 5), V- (RJ45 Pin 7, 8)

MAC Address

8K MAC address table

Switching capacity

4.8G

LED Indicator

Per port: Link/Activity
Per PoE port: PoE
Per unit: Power

Network Cable

2-pair UTP Cat. 5e cable (100m),
EIA/TIA-568 100-ohm STP (100M)

Dimen sion

440mm × 200mm × 44mm (W × D × H)

Ventilation

Built'in Noiseless FAN

Operating Temp

0°C to 45°C (32°F to 113°F)

Operating Humidity

10% to 90% (Non-condensing)

Power Supply

Built-in power supply
Input: AC 100-240V, 5O/60Hz

Power Consumption

250 Watt

EMI

FCC Class B, CE

2/12/16

 Find Similar Products by Tag

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

subscribe to our newsletter

Shop With Trust!

SP Security, Inc. BBB Business Review

Copyright 1995 - 2018 SP Security Inc. All Rights Reserved.
 Sitemap

Click the button below to add the HA-PW2016-16P 16 Port 10/100Base-TX with 16 Port PoE Switch to your wish list.